Small surfaces, careful details
Bathroom Vanity Tops in Pasadena, CA
Quartz, granite or marble cut to your vanity, with the sink, faucet holes and side splashes fitted to the room.
- No-charge measuring visit at your home
- Line-by-line price on paper ahead of fabrication
- Templating waits until the cabinets are level and secure
A New Top for an Old or New Vanity
Bathroom vanity tops are one of the easiest ways to make a dated bathroom feel finished. A single-sink vanity top uses only a few square feet of stone, so materials that feel expensive across a whole kitchen, like marble or a premium quartz, become realistic in a bath. Many people also use leftover pieces of larger slabs for vanities, which can lower the cost.
Standard versus custom vanities
Big-box vanities come in standard widths and often include a cultured marble or thin stone top. If you are keeping the cabinet but want better stone, we measure it and cut a new top placing the bowl and faucet holes to suit you. Craftsman and Spanish Revival bathrooms in Pasadena often have odd dimensions, built-in vanities, or walls that are not square, so a custom top is common. Double vanities, makeup counters and tops that run wall to wall all need scribing to fit uneven plaster.
Sink styles
Undermount sinks give a clean edge and are easiest to wipe; a vessel bowl rests above the counter, so the stone needs just one drain opening; integrated sinks, molded from the same material, are available in some solid surface and quartz products. Each changes how the top is fabricated, so choose the sink and faucet before we template. Wall-mounted faucets mean no faucet holes in the stone at all, but they require plumbing work inside the wall.
Hard water and bathroom stone
Bathrooms see standing water, toothpaste, soap residue and cosmetics. In Pasadena's hard water, polished marble around a faucet can collect mineral deposits and dull where people scrub with acidic cleaners. Quartz is the lowest-maintenance choice; honed marble hides etching better than polished; granite falls in between. A quick wipe after use prevents most buildup.
Backsplashes and side splashes
Most vanity tops include a 4-inch backsplash, and a side splash where the top meets a wall. Some owners run the stone higher behind the faucet or up to the mirror. We cut splashes from the same slab so they match.
Older plumbing
In older homes, pulling a vanity top can show corroded shut-off valves or old drain parts. We point these out when we find them so you can have them replaced while the top is off.
Securing the top
Even a small vanity top is heavy for its size. We confirm the vanity cabinet is fastened to the wall and level, then set the top on adhesive so it does not shift, a detail that counts in an area that has had felt earthquakes on the Raymond and Sierra Madre faults.
What This Covers
Vanity top work covers measurement, sink choice and the finished splash.
Single and double vanity tops
Tops cut for standard widths or for custom and built-in vanities.
Sink and faucet cutouts
Undermount, vessel or drop-in sinks with faucet holes drilled to your fixtures.
Back and side splashes
Matching splashes cut from the same slab and scribed to the wall.
Remnant options
Pieces of larger slabs used for small vanities when color and size work.

Typical Bathroom Vanity Tops Costs
| What is priced | National figures |
|---|---|
| Quartz top, material | $50 to $200 per sq ft |
| Granite slab top, material | $40 to $100 per sq ft |
| Cultured marble top, material | $40 to $180 per sq ft |
| Marble vanity top, 20 by 36 inches, installed | $200 to $750 |
| Sink installation (sink not included) | about $400 average |
| Removing an old vanity | $115 to $500 |
From HomeAdvisor (June 2026) and HomeGuide. These are national figures. Los Angeles-area prices often run higher, and your square footage, edge choice, cutouts and site access move the final number. The figure on your signed quote is what you pay.
How It Works
1. Measure the vanity
Cabinet, wall and fixture measurements are taken and sink and faucet picks confirmed.
2. Pick the stone
Choose from slabs or remnants that fit the size and look you want.
3. Fabricate
The top and splashes are cut, with sink and faucet holes placed.
4. Install
We set the top, mount the bowl and caulk the splash to the wall.

Bathroom Vanity Tops Questions
What does a stone vanity top usually run?
HomeGuide puts a 20 by 36 inch marble vanity top at $200 to $750 installed, and HomeAdvisor lists quartz material at $50 to $200 per square foot. Size, sink type and edge choice change the price.
Can I put a new top on my existing vanity?
Yes, if the cabinet is in good shape and level. We measure it, check how it is fastened and cut the top to fit.
Does marble work well in a bathroom?
It can be. Marble etches from acidic products and shows hard water, but a honed finish and quick wiping make it manageable, and the small surface area keeps the cost reasonable.
Could a slab remnant work for my vanity?
In many cases, yes: offcuts from bigger kitchen slabs suit single vanities when size and color line up. Ask about remnants at the estimate.
Bathroom Vanity Tops Service Areas
- Countertops in Pasadena, CA
- Countertops in Altadena, CA
- Countertops in South Pasadena, CA
- Countertops in San Marino, CA
- Countertops in La Cañada Flintridge, CA
- Countertops in Sierra Madre, CA
- Countertops in Arcadia, CA
- Countertops in Monrovia, CA
- Countertops in Temple City, CA
- Countertops in San Gabriel, CA
- Countertops in Alhambra, CA
- Countertops in Glendale, CA
- Countertops in Burbank, CA
- Countertops in La Crescenta-Montrose, CA
- Countertops in Eagle Rock, CA
- Countertops in Duarte, CA
- Countertops in Highland Park, CA
- Countertops in Rosemead, CA
Get a Bathroom Vanity Tops Estimate
Get a no-cost visit for bathroom vanity tops.